text.skipToContent text.skipToNavigation

Part #: 200PH-5

Description: 2" Poly Pump With 5.5 HP Honda® Engine

STOCK ITEM
Specifications
Family: Pumps
Type: Polypropylene Pumps
Style: Gas Engine & Pump
Size: 2"
Weight 51.0 lbs
Features & Benefits
  • Breather through air cleaner.
  • Cast iron cylinder sleeve.
  • CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITHFLAMMABLE LIQUIDS.
  • Corrosion resistant.
  • EPDM Standard, FKM ­available.
  • Heavy duty flywheel.
  • High oil fill
  • Lightweight.
  • Low maintenance.
  • MOTOR
  • NOTE: Engine warranty service available at authorized BRIGGS & Stratton® and Honda® dealers.
  • OilGuard® low oil sensor.
  • Overhead valve.
  • Precision molded construction.
  • PUMP
  • Superior design.
Kits & Replacements Parts
Item Description Part Number Qty Per
2 Poly Pump Rear Bracket 12703A 1
3 Check Valve 12705 1
1 Poly Pump Volute 12702A 1
5 2" Poly Pump Body 12712A 1
6 5/16-24 X 1¾" HHCS, 18-8 Stainless Steel 12715A 4
7 Slinger For 5.5 & 6.5 HP Engine 12716 1
8 O-Ring For Screw Head -EPDM 12717 4
4 O-Ring (Seal Assembly) EPDM 12710 1
9 EPDM Pump Body O-Ring 2-375 12719A 1
10 Body Screw 12720 10
12 EPDM Seal Poly Pump Boxed 12713 1
13 O-Ring Segment 12754 1
14 5/16"-24 X 1.12" HFS, 316 Stainless Steel 12765A 1
16 Impeller Bolt Gasket-FKM 12774VA 1
18 #10 X 1 ½" PPH Sms 18-8 Stainless Steel 12900 1
17 7/16-14 Hex Nut ⅝" 316 Stainless Steel 12775A 1
11 #6 X ½" Pph SMS, 18-8 SS 12725 2
19 5/16" Flat Washer, 316 Stainless Steel 12901 4
21 ¼" Stainless Steel Lockwasher V07018 10
20 3/16 X 3/16 X 5/8 Impeller Key 12902A 1
22 ¼" Stainless Steel Nut V07019 10
Literature & Technical Documents
Videos