Part #: 300PIHY

Description: 3" Cast Iron Pump With 21 HP Hydraulic Motor

Standard Lead Times

Specifications

Features & Benefits

21 H.P. Motor.
Carbon ceramic seal with stainless steel cup and spring with FKM rubber.
CAUTION-WARNING: Please do not run pumps dry, restrict or reduce port sizes or dead head pumps. This could cause component failure to pump.
DO NOT USE WITH FLAMMABLE LIQUIDS.
Dynamically balanced impeller.
Hydraulic fluid capacity Minimum :9 Gallons :and Maximum 13 Gallons.
Open or closed syste.
Replaceable inlet and outlet flanges.
Rugged construction for dependable service.
Recommended to use the motor spool control valve or a suitable equivalent. The lack of such a valve in this circuit may cause failure to the hydraulic motor.

Kits & Replacements Parts

Item	Description	Part Number	Qty Per
1	Cast Iron Pump Housing	18001	1
2	Wear Plate	18004	1
3	-16 X 1.25" FHSCS, 18-8 Stainless Steel	18106	2
5	3" Pump Mechanical Seal	18025	1
5	3" Cast Iron Pump Severe Duty Seal	18025SD	1
6	3/8-16 x 2 1/8" STUD, 304 SS	18218	6
9	Cap Screw Hex Head -16 X 1-1/8 Stainless Steel	18010SS	8
7	⅜"Stainless Steel Lock Washer	V20018	14
10	Outlet Gasket -EPDM	18009	1
8	⅜"Stainless Steel Body Nut	V20019	6
11	3" National Pipe Thread Outlet Flange	18008	1
12	Flange, Inlet 3" National Pipe Thread	18012	1
14	5/8-11 Thread Handle	18033	1
13	Check Valve Inlet Gasket	18013	1
16	3" Poly Pump Drain/Prime Plug	13777	1
15	5/8-11 Thread Stainless Steel Jam Nut	18034	1
18	Adapter Gasket	18021	1
17	Plug For 1 & 1¼" Line Strainer	12777	1
20	3" Hydraulic Adapter Shaft	18055	1
21	Bearing	18502	1
19	Cast Iron Hydraulic Motor Adapter	18049	1
22	304 Stainless Steel Hex Cap Screw	18056	2
25	1/2-13 UNC 2B Hex Nut, 18-8SS	17010	2
26	UM16 Hydraulic Motor Assembly For 3" Pump	HY1012	1
27	Stainless Steel Clamp	18029	1
N/S	3" Iron Pump Repair Kit	18100	1
28	EPDM O-Ring ¾" Prime/Drain Plug	13778	1